
By submitting this form you agree that the information provided are exploited by EVE Audio to process your request.
Information about your personal data:
The only collected personal data is the data provided in this formular.
Your data will be directly treated by EVE Audio.
Your data will only be used to process your request.
Your data will be only accessible to the concerned EVE Audio staff members.
Your data will never be shared with any third party.
Your data will be kept during one year after your request has been processed.
In accordance with the European GDPR regulation you may exercice your right to access your personal data by requesting them . In your message you may also ask us to amend or delete your personal data.
The SC207 is our mid-range two-way monitor speaker and its size and form factor make them appropriate for a lot of different rooms.
The SC207 has great power efficiency that will let you clearly examine what's happening in your music. The modest and elegant size of the SC207, along with its quality precision, will make it great in your setup without overwhelming your working area.
Sear Sound Studio
With the SC207, you will get an extended bass frequency response (down to 44 Hz), courtesy of our 6.5" SilverCone honeycomb structured woofer and driven by a sophisticated low distortion copper cap magnet system with our 1.5" voice coil. The result is a very tight and dynamic bass, along with the usual greater linear excursion.
A PWM amplifier, with protection-limiting and capable of delivering a short-term output power of 100W, guarantees that the SC207 will never run out of juice. And with a maximum output level of 106 dB (SPL @ 1m), you can be sure that there is plenty of power to make critical and precise judgements over your mixes.
The SC207 is also the first EVE model monitor that uses our proprietary AMT (Air Motion Transformer) RS2. That means it can deliver a higher output level that is due to a bigger magnet system inside.
As with every other EVE Audio speaker, you get both balanced XLR inputs and unbalanced RCA inputs for greater convenience.
All EVE Audio monitors feature a high-resolution DSP electronics. A high-quality analog/digital converter from BurrBrown (24bit/192kHz) converts the analog input signal supplied via RCA or XLR. The DSP provides latency-free filtering while protecting tweeter and woofers against overload across the entire frequency range. When switched on, the volume of the monitor increases slowly to leave enough time to reduce the source volume if the input signal is too loud.
Adjustments to the acoustic environment can be made via the front rotary/pressure encoder, the SMART-knob with rotating LED ring. This knob allows the levelling of system volume as well as the adjustment of filters for room variables (low shelf, mid eq and high shelf filters). All settings are displayed on the LED ring, providing instant information about the selected values. The brightness of the LED ring can be adjusted for dark studios or video applications.
High-quality Class D amplifiers complete the system and deliver enough power to the demands of modern music production. Selected volume and/or filter settings can be independently fixed with DIP-switches that are positioned on the rear of the amplifier to prevent unauthorised or unintentional adjustments.
The rear-facing bass reflex channel is, as usual with EVE Audio, designed for low airflow noise and enhances the powerful and precise bass reproduction.
Low frequencies propagate omnidirectionally. The radiation of low frequencies is spherical and the wavelength very large. For this reason, the differences in the position of the bass reflex channels in relation to the wall are negligible.
For more information on our bass reflex port design, click here.
Free-field frequency response (1/6 oct.)
Red = 0° / Green = 30° horizontal off-axis
Distortion
Orange = 2nd / Green = 3rd vs frequency response (red)
Polar pattern (1m)
Red = 200Hz / Green = 1kHz / Blue = 5kHz
Product | SC207 |
---|---|
Description | Nearfield/Midfield Monitor |
Dimensions (WxHxD) [mm] | 215 x 330 x 280 |
Dimensions (WxHxD) ["] | 8.46 x 12.99 x 11.02 |
Free-field frequency range (-3dB) | 44Hz - 21kHz |
Tweeter | AMT RS2 |
Midrange | ![]() |
Mid-Woofer | ![]() |
Woofer | 165mm/6.5" |
Cross-over frequency | 2800Hz |
Max SPL per pair | 116dBspl |
Number of amplifiers | 2 |
Output power (woofer) | 100W |
Output power (mid-driver) | ![]() |
Output power (tweeter) | 50W |
Protection limiter | ![]() |
Settings | |
Volume | -inf. - +6dB |
System volume (Satellite & Sub) | ![]() |
Subwoofer volume | ![]() |
High-shelf filter (-5dB - +3dB) | > 3kHz |
Mid EQ (-3dB - +3dB) | ![]() |
Desk filter boost (0dB - +3dB) | 80Hz |
Desk filter cut (-5dB - 0dB) | 170Hz |
Position filter | ![]() |
Low-shelf filter (-5dB - +3dB) | < 300Hz |
LED brightness setting | ![]() |
Input select | ![]() |
Level-lock dip switch | ![]() |
Filter-lock dip switch | ![]() |
Woofer-change dip switch (L/R) | ![]() |
Input level dip switch | ![]() |
Standby dip switch | ![]() |
Satellite filter dip switch | ![]() |
Phase inversion | ![]() |
Switchable Satellite filter | ![]() |
Variable Subwoofer filter | ![]() |
Remote control | ![]() |
Connectors | |
XLR in (impedance) | ![]() |
RCA in (impedance) | ![]() |
Digital optical in | ![]() |
USB in | ![]() |
RCA subwoofer out | ![]() |
XLR in left (impedance) | ![]() |
XLR in right (impedance) | ![]() |
XLR in LFE (impedance) | ![]() |
XLR out satellite left (impedance) | ![]() |
XLR out satellite right (impedance) | ![]() |
XLR out LFE (impedance) | ![]() |
Power consumption | |
Standby | < 1W |
Full output | 120VA |
Misc. | |
Backmounting thread inserts | ![]() |
Mic stand thread inserts | ![]() |
Weight [kg/lb.] | 8 / 17.6 |