40 Hz - 21 kHz
Frequency range
en
Active 3-way midfield studio monitor
Highly accurate sound reproduction and a true dynamic response
The most important features at a glance
Frequency range
Woofer size
Max. SPL
EVE Audio monitors feature high-resolution DSP electronics for precise room adaptation. Users can control filters, volume, and adjustments directly from the monitor using the rotary SMART-knob. The DSP is supported by a high-quality A/D converter, ensuring signal integrity. Settings are easily lockable to prevent accidental changes, offering a user-friendly and reliable design.
Our studio monitors use Air Motion Transformers to reproduce high frequencies with accuracy and low distortion. The hand-folded diaphragm produces sound waves 4x more efficiently than traditional tweeters. To complete our systems we developed glass-fiber coated SilverCone woofers providing a tight, dynamic bass with minimal distortion.
EVE Audio uses a passive radiator design in their subwoofers, replacing traditional bass reflex tubes. This eliminates noise from air turbulence and pipe resonances while reducing subsonic excursions and intermodulation distortion. The design allows for lower tuning frequencies in compact cabinets, providing high-quality sound in smaller monitors.
EVE Audio prioritizes efficient, clean design by eliminating unnecessary elements like front-facing bass ports. Instead, we use a tuned, larger rear rectangular port without hard edges, enhancing low-frequency efficiency and reducing distortion at high volumes. This design delivers punchy bass without the drawbacks of port compression, ensuring monitors that sound as good as they look.
Take full control of your EVE Audio subwoofer with our intuitive remote control. Adjust the volume, switch between different settings and fine-tune your bass levels with ease—all from the comfort of your listening position. Experience seamless integration and enhanced precision, ensuring your audio setup is always optimized to your preferences.
We source materials from top suppliers and ensure the highest level of craftsmanship. As a testament to German engineering excellence, each product undergoes meticulous, individual quality control in our Berlin factory before shipping. This guarantees that every customer receives a top-of-the-line product they can trust.
EVE Audio monitors feature high-resolution DSP electronics for precise room adaptation. Users can control filters, volume, and adjustments easily with the front-facing SMART-knob. The DSP is supported by a high-quality A/D converter, ensuring signal integrity. Settings are easily lockable to prevent accidental changes, offering a user-friendly and reliable design.
Our studio monitors use Air Motion Transformers to reproduce high frequencies with accuracy and low distortion. The hand-folded diaphragm produces sound waves 4x more efficiently than traditional tweeters. To complete our systems we developed glass-fiber coated SilverCone woofers providing a tight, dynamic bass with minimal distortion.
EVE Audio uses a passive radiator design in their subwoofers, replacing traditional bass reflex tubes. This eliminates noise from air turbulence and pipe resonances while reducing subsonic excursions and intermodulation distortion. The design allows for lower tuning frequencies in compact cabinets, providing high-quality sound in smaller monitors.
EVE Audio prioritizes efficient, clean design by eliminating unnecessary elements like front-facing bass ports. Instead, we use a tuned, larger rear rectangular port without hard edges, enhancing low-frequency efficiency and reducing distortion at high volumes. This design delivers punchy bass without the drawbacks of port compression, ensuring monitors that sound as good as they look.
Take full control of your EVE Audio subwoofer with our intuitive remote control. Adjust the volume, switch between different settings, and fine-tune your bass levels with ease—all from the comfort of your listening position. Experience seamless integration and enhanced precision, ensuring your audio setup is always optimized to your preferences.
We source materials from top suppliers and ensure the highest level of craftsmanship. As a testament to German engineering excellence, each product undergoes meticulous, individual quality control in our Berlin factory before shipping. This guarantees that every customer receives a top-of-the-line product they can trust.
The SC307
The SC307 is a powerful monitor perfectly suited for near- and midfield monitoring. And, in surround set ups, it will work excellently as a center channel too.
The midfield monitor combines the power from three different amplifiers to deliver a very efficient, dynamic and low noise sound reproduction.
Our three-way systems are developed for critical and detailed listening. Although they will be able to provide lots of power and thunderous bass frequencies, they will also excel if you're looking for a precise and very detailed pair of speakers.
Even if the focus is on the sound - our monitors offer a holistic solution that is well thought out from A to Z
Simply set and save filters & volume.
For precise bass reproduction without background noise.
For precise bass reproduction without background noise.
Your settings are saved (even without power).
A slow volume increase when switching on protects ears and equipment.
Efficient sound reproduction
Our three-way systems are designed around the concept to distribute the frequencies properly between all individual components and raise the efficiency of your speakers effectively.
In our three-way systems, each driver (woofers or tweeter) gets its own amplifier. One of the woofers serves frequencies up to 300 Hz as a kind of "bass" whilst the other woofer gives you a fuller range as a bass-midrange driver, up to the 3000 Hz crossover frequency. From that frequency on, our AMT tweeter takes over. This minimizes interference between the drivers and also allows the SC307 to deliver a very efficient and dynamic sound reproduction.
What this design philosophy means is that less effective physical work is being made by each individual woofer, as the band of frequencies to be reproduced are divided between both woofers. This in turn will result in less mechanical inertia and a more efficient sound transmission.
Costantino Carrara
At the age of 12 he began taking professional piano lessons, today his music has been acclaimed all over the world.
Tech Talk
Both woofers consist of our proprietary 6.5" SilverCone, the same that is used in our two-way system, the SC207, and features our sophisticated low distortion copper cap magnet system. However, due to the fact that two of these woofers are being used simultaneously, you get a bigger frequency response down to 40 Hz.
The SC307 also makes use of the proprietary AMT RS2 tweeter, which uses a bigger front plate, and a bigger internal magnet to drive the AMT tweeter with greater efficiency.
The three 100 W PWM power amplifiers won't leave you lacking any power either, as the maximum sound pressure level of 114 dB (SPL @ 1m) will attest.
And no worries determining how to place the SC307 in your room or studio properly. Our DSP section will assist you in choosing the speaker for left and right hand side. So you will always get proper symmetry between your speakers, instead of having to move them around as usually. With a DIP switch located, on the rear of speakers these settings for room adaption can be temporarily locked.
As with every other EVE Audio speaker, you get both balanced XLR inputs and unbalanced RCA inputs for greater convenience.
Our tweeters base on the ribbon tweeter technology. We reinvented our own version of the AMT which our speakers are well known for.
Understanding the Air Motion Transformer
The Air Motion Transformer (AMT) is a unique driver technology, distinct from other audio drivers. It utilizes a lightweight, hand-folded diaphragm that is thinly coated with aluminum. The current of the music signal flows through these conductive strands.
The diaphragm is placed in a powerful magnetic field leading to movement in the folds caused by the Lorentz force. Due to the opposing direction of the current the walls of each single fold work against each other. The air between the folds is squeezed in and out at a ratio of 1:4, compared to the 1:1 ratio of a regular dome tweeter.
This results in higher resolution and dynamics in the tweeter section, along with a very low distortion level, allowing superior sound quality with enhanced detail and clarity.
Press and hold the control three seconds in order to put the monitor in Standby mode. The volume will decrease gradually while the LED ring lights up once around the Volume control. Afterwards, the LED on the right end will remain dimly lit and the power consumption is reduced to 1 watt.
The volume can be adjusted by turning the knob. Depending on the LED mode selected, the volume will be displayed as a dim/ bright circle or as a dim/bright point.
To put the monitor in Mute Mode, turn the volume control counter clockwise until you reach the minimum level. When the LED on the left end lights up dimly the Mute Mode is activated.
Press the SMART-knob once to enter the Settings menu. Here you can set different filters as well as the LED ring’s behavior. The LED of the currently active function blinks. Click the different filters above to find out more about them!
The High-Shelf Filter helps you adjust frequencies above 3kHz in 0.5dB increments. You may need it in the following situations:
Distance from Speakers: High frequencies weaken as you move further from the speakers. If you sit far from the speakers, boost the high frequencies. If you're close, like in a desktop setup (about 1 meter or 3 feet away), you might need to reduce the high frequencies.
Room Acoustics: In a room with few reflective surfaces ("dead room"), boosting high frequencies can create a more balanced sound. Conversely, in a room with many reflective surfaces, reducing the high frequencies is advisable.
Adjust the High Filter accordingly and achieve the best sound quality based on your listening position.
The Mid Filter is a bell filter centered at 1kHz. It allows you to boost or cut the midrange by up to +/-3dB in 0.5dB increments. Here's what you should consider:
Frequency Balance: The midrange is crucial for balancing lower and higher mid frequencies. Use the Mid Filter to fine-tune the balance between the fundamental and harmonic frequencies in your music.
Room Acoustics: The acoustics of your room can affect how midrange frequencies are perceived. Sound energy from the monitors may reflect off surfaces like walls, floors, and ceilings, altering the sound. Adjust the Mid Filter to compensate for these reflections and achieve a balanced sound.
The Mid filter is available on SC2070, SC3070, SC4070, SC3010 and SC3012.
The desk filter allows you to boost or cut you low-mid frequencies in 0.5dB increments:
Narrow-Band EQ: Depending on the model the filter is centered between 160 and 200Hz. When turned down, it reduces the low-mid boost often caused by reflections from mixers and similar surfaces. Decrease the filter gain to lessen this effect.
EQ at 80Hz: When turned up, it enhances the lower frequencies, giving more punch to the sound.
The Low-Shelf Filter allows you to boost or attenuate frequencies below 300Hz in 0.5dB steps. Here's when to use it:
Attenuating Low Frequencies: If your room's acoustics cause a boost in low frequencies (due to room modes or speakers being close to walls), you can reduce them with the Low-Shelf Filter.
Boosting Low Frequencies: If the low frequencies are too weak, you can enhance them to achieve a balanced frequency response.
Adjust the Low-Shelf Filter accordingly to address any issues in the low frequency range caused by your room's acoustics.
The LED Mode determines how the LED ring displays the volume level. There are four available modes:
Bright Ring: All LEDs up to the selected volume level light up brightly. As the signal gets louder, he brightly lit ring extends.
Bright Point: Only the LED corresponding to the selected volume level lights up brightly. As the signal gets louder, the brightly lit point moves further up.
Dim Ring: All LEDs up to the selected volume level light up dimly. As the signal gets louder, the dimly lit ring extends. The LEDs light up brightly momentarily when you adjust the volume.
Dim Point: Only the LED corresponding to the selected volume level lights up dimly. As the signal gets louder, the dimly lit point moves further up.
In all modes, the LEDs indicate volume levels, adjusting in four steps. Intermediate steps are shown by the brightness level between two adjacent LEDs.
All facts and figures in detail
Width x Hight x Depth in mm
-3 dB at 1 m distance
Max. SPL per pair
Output power per speaker
Diameter
Diameter
Cross-over between drivers
These products may also be interesting to you
Our products are available at trusted distributors and dealers all over the world
© 2024 EVE Audio GmbH
