
By submitting this form you agree that the information provided are exploited by EVE Audio to process your request.
Information about your personal data:
The only collected personal data is the data provided in this formular.
Your data will be directly treated by EVE Audio.
Your data will only be used to process your request.
Your data will be only accessible to the concerned EVE Audio staff members.
Your data will never be shared with any third party.
Your data will be kept during one year after your request has been processed.
In accordance with the European GDPR regulation you may exercice your right to access your personal data by requesting them . In your message you may also ask us to amend or delete your personal data.
For large recording and mastering studios, film and television post-production facilities, cinema applications and in-wall installations, nothing beats our main monitors SC3010 and SC3012.
The SC3010/SC3012 systems feature a very powerful amplifier array, with one amplifier per driver. All drivers, and especially our proprietary AMT RS6 tweeter, are developed to deliver high sound pressure levels, extremely low distortion and an optimised directivity. Together with the ultra-stiff plywood front plate and a special inner construction to lower resonances, they offer a smooth directivity, highly defined mids, pristine high frequencies and a powerful and tight low end.
The SC3010/SC3012 systems are also built with in-wall installations in mind. In this case, simply adjust the filter controls to "inwall". A set of high-density foam is provided to close the backfiring bass ports.
The silver module housing the midrange driver and our AMT RS6 tweeter can be rotated by 90 degrees allowing you to set up the speakers either horizontally or vertically.
JB Tonstudio
The SC3012 is a high-resolution speaker, which sits at the crossroads of power and precision. This monitor is perfectly at home in any serious recording or mastering studio.
One sophisticated 12" SilverCone is in charge of covering a frequency range that goes as low as 25 Hz (-3 dB). Its long excursion driver will easily reproduce the lowest frequencies with an extraordinarily low harmonic distortion level.
The SC3012 also features our newly developed 5" midrange unit. Its glass fibre layered Rohacel™ sandwich diaphragm is responsible for clear and detailed midrange frequency reproduction. Both the 12" SilverCone woofer and 5" SilverCone midrange are equipped with our very low distortion copper cap magnet system.
The Air Motion Transformer (AMT) RS6 is exclusive to SC3012 and its smaller brother SC3010 and completes the system. The RS6 was developed to allow the SC3010/SC3012 to couple a faithful high frequency reproduction along with a clear and detailed high mid-range. This new AMT is 2.5 times bigger than the RS1, RS2 and RS3 Air Motion Transformer units, and it is a crucial part of the system as it helps to couple the middle and high frequencies with great precision. The crossover frequency goes down to 1800 Hz, ensuring a smooth directivity, and a very well defined mid to high-range response.
Each driver is powered by its own custom specified PWM amplifier. Tweeter and midrange are supported with a 250 W amplifier each while the bass woofer is amplified with a bridged 800 W PWM module. All drivers are protected with a limiter detection circuit. With a maximum output level of 118 dB (SPL @ 1 m) you'll easily be able to judge your mixes precisely, whatever their intended output level is.
Simply put, the SC3012 is the perfect match of robustness and accuracy, where the whole becomes more than the sum of the parts. The SC3012 represents the pinnacle of EVE Audio engineering, our flagship model, and with good reason. This is the monitor you have been looking for.
As with every other EVE Audio speaker, you get both balanced XLR inputs and unbalanced RCA inputs for greater convenience.
All EVE Audio monitors feature a high-resolution DSP electronics. A high-quality analog/digital converter from BurrBrown (24bit/192kHz) converts the analog input signal supplied via RCA or XLR. The DSP provides latency-free filtering while protecting tweeter and woofers against overload across the entire frequency range. When switched on, the volume of the monitor increases slowly to leave enough time to reduce the source volume if the input signal is too loud.
Adjustments to the acoustic environment can be made via the front rotary/pressure encoder, the SMART-knob with rotating LED ring. This knob allows the levelling of system volume as well as the adjustment of filters for room variables (low shelf, mid eq and high shelf filters). All settings are displayed on the LED ring, providing instant information about the selected values. The brightness of the LED ring can be adjusted for dark studios or video applications.
High-quality Class D amplifiers complete the system and deliver enough power to the demands of modern music production. Selected volume and/or filter settings can be independently fixed with DIP-switches that are positioned on the rear of the amplifier to prevent unauthorised or unintentional adjustments.
The rear-facing bass reflex channel is, as usual with EVE Audio, designed for low airflow noise and enhances the powerful and precise bass reproduction.
Low frequencies propagate omnidirectionally. The radiation of low frequencies is spherical and the wavelength very large. For this reason, the differences in the position of the bass reflex channels in relation to the wall are negligible.
For more information on our bass reflex port design, click here.
Free-field frequency response (1/6 oct.)
Top = Vertical configuration / Bottom = Horizontal configuration
Red = 0° / Green = 30° horizontal off-axis
Distortion
Orange = 2nd / Green = 3rd vs frequency response (red)
Polar pattern (1m)
Top = Vertical configuration / Bottom = Horizontal configuration
Red = 200Hz / Green = 1kHz / Blue = 5kHz
Product | SC3012 |
---|---|
Description | Main Reference Monitor |
Dimensions (WxHxD) [mm] | 435 x 650 x 490 |
Dimensions (WxHxD) ["] | 17.13 x 25.59 x 19.29 |
Free-field frequency range (-3dB) | 25Hz - 21kHz |
Tweeter | AMT RS6 |
Midrange | 130mm/5" |
Mid-Woofer | ![]() |
Woofer | 300mm/12" |
Cross-over frequency | 220Hz/1800Hz |
Max SPL per pair | 130dBspl |
Number of amplifiers | 3 |
Output power (woofer) | 800W |
Output power (mid-driver) | 250W |
Output power (tweeter) | 250W |
Protection limiter | ![]() |
Settings | |
Volume | -inf. - +6dB |
System volume (Satellite & Sub) | ![]() |
Subwoofer volume | ![]() |
High-shelf filter (-5dB - +3dB) | > 3kHz |
Mid EQ (-3dB - +3dB) | 1kHz |
Desk filter boost (0dB - +3dB) | 80Hz |
Desk filter cut (-5dB - 0dB) | 160Hz |
Position filter | ![]() |
Low-shelf filter (-5dB - +3dB) | < 300Hz |
LED brightness setting | ![]() |
Input select | ![]() |
Level-lock dip switch | ![]() |
Filter-lock dip switch | ![]() |
Woofer-change dip switch (L/R) | ![]() |
Input level dip switch | +7dBu/+22dBu |
Standby dip switch | ![]() |
Satellite filter dip switch | ![]() |
Phase inversion | ![]() |
Switchable Satellite filter | ![]() |
Variable Subwoofer filter | ![]() |
Remote control | ![]() |
Connectors | |
XLR in (impedance) | ![]() |
RCA in (impedance) | ![]() |
Digital optical in | ![]() |
USB in | ![]() |
RCA subwoofer out | ![]() |
XLR in left (impedance) | ![]() |
XLR in right (impedance) | ![]() |
XLR in LFE (impedance) | ![]() |
XLR out satellite left (impedance) | ![]() |
XLR out satellite right (impedance) | ![]() |
XLR out LFE (impedance) | ![]() |
Power consumption | |
Standby | < 1W |
Full output | 1000VA |
Misc. | |
Backmounting thread inserts | ![]() |
Mic stand thread inserts | ![]() |
Weight [kg/lb.] | 44 / 97 |